Southeast Toyota is recalling certain vehicles because the seat heater element may become damaged as a result of compression of the seat cushion. The damaged element could short causing burning of the seat cushion, increasing the risk of personal injury. Dealers will disconnect seat heaters with copper strand elements and refund the purchase price of the seat heater accessory to correct this concern.
Toyota Tundra Recalls
This limited regional recall is for vehicles currently registered or first sold in southern Florida, along the Gulf Coast, Puerto Rico, Hawaii, the U.S. Virgin Islands, Guam, Saipan and American Samoa. Upon deployment the passenger airbag inflator could rupture, increasing the risk of personal injury. Dealers will replace the passenger side air bag inflator to correct this concern. If a replacement inflator is not available, as an interim measure, the dealer will disable the front passenger air bag and advise the customer not to use the front passenger seat until a replacement inflator is installed.
This limited regional recall is for vehicles currently registered or first sold in Florida, Puerto Rico, Hawaii and the U.S. Virgin Islands, and equipped with Takata-brand air bag inflators. Upon deployment the driver and/or passenger airbag inflator could rupture, increasing the risk of personal injury. Dealers will replace the affected airbag inflator modules to correct this concern.
When deployed, excessive pressure can build in the passenger front airbag. This could cause the inflator to rupture, increasing the risk of personal injury to vehicle occupants. This recall affects both originally installed passenger front airbags as well as those that were installed as replacement service parts. Toyota and General Motors will replace the passenger front airbag inflator on their respective vehicles involved in this recall.
Airbags use a chemical reaction contained in an inflator module to create the pressure necessary to inflate the bags when deployment is required. These vehicles are being recalled because the front passenger airbag inflator may produce excessive internal pressure when deployed. As a result, the inflator module could rupture, causing metal fragments to strike vehicle occupants. Dealers will inspect and replace any defective passenger front airbag inflator module found.
Vehicles have a tire size/weight rating label to inform owners of the carrying capacity of their vehicle. These models are being recalled because the incorrect vehicle weight rating is shown on the information label. This could result in vehicle and tire overloading, increasing the risk of tire failure. Owners will be provided an updated vehicle weight label to correct this concern.
Toyota and General Motors are recalling certain models because the power window master switch assembly in some of these vehicles was built using a less precise process for lubricating the internal components of the switch assembly. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat. This could result in the switch melting or possibly catching fire. Dealers will inspect and repair or replace the master window switch as necessary.
Gulf States Toyota is recalling 502 vehicles due to an incorrect load capacity label. An incorrect label could lead to vehicle overloading, resulting in tire failure and increasing the risk of a crash. Gulf States will provide a corrected label. Dealers install the correct label upon request.
Southeast Toyota is recalling 1629 vehicles because the tire pressure monitoring system may not have been calibrated correctly. As a result, the low tire pressure warning lamp may not illuminate if tire pressure drops. Operating the vehicle on under-inflated tires can result in tire failure, increasing the risk of a crash. Dealers will recalibrate the system to correct this concern. This recall is expected to begin during May of 2011.
The drive shaft may fail on vehicles equipped with a 3-joint type shaft. Due to improper casting of the slip yoke, it may break, causing the drive shaft to separate at the joint and come into contact with the road surface. Failure of the drive shaft can result in a loss of vehicle power and control, increasing the risk of a crash. Dealers will inspect the drive shaft and replace it as necessary. This recall is expected to begin during May 2011.