As part of normal operation of the air conditioning system, condensation will accumulate in the condenser housing behind the dashboard. A drain is incorporated so that excess water can drain out. This drain hose can become plugged, the accumulated water can leak onto the airbag control module. This can result in an electrical short in the control module. If this were to occur the airbags could become disabled or deploy unexpectedly. Improper airbag operation increases the risk of personal injury and/or a crash. The power steering assist could also become inoperable resulting in increased steering effort. Dealers will seal the air conditioning condenser housing and install a protective cover on the airbag control module to correct this concern.
Toyota Camry Hybrid Recalls
An electrical short can develop in the windshield wiper switch assembly. As a result, the wipers may not function as expected. If the driver's visibility is reduced the risk of a crash increases. Dealers will replace the wiper switch assembly in affected vehicles to correct this concern.
Vehicles have a tire size/weight rating label to inform owners of the carrying capacity of their vehicle. These models are being recalled because the incorrect vehicle weight rating is shown on the information label. This could result in vehicle and tire overloading, increasing the risk of tire failure. Owners will be provided an updated vehicle weight label to correct this concern.
Vehicles that have had accessories added to the seats such as seat heaters, seat covers or DVD headrests may not have the occupant sensor system of the passenger seat calibrated properly. This can affect passenger air bag operation in a crash. Dealers will test the sensitivity of the occupant detection sensors and recalibrate them as necessary free of charge to resolve the concern.
Toyota and General Motors are recalling certain models because the power window master switch assembly in some of these vehicles was built using a less precise process for lubricating the internal components of the switch assembly. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat. This could result in the switch melting or possibly catching fire. Dealers will inspect and repair or replace the master window switch as necessary.
These vehicle were sold without the required load carrying captivity modification label. Dealers will mail the corrected label to vehicle owners. Owners have the option of requesting that the dealer install the label. This recall is expected to begin on May 27, 2010.
Toyota is recalling 2005–2010 Avalon; 2007–2010 Camry, 2009–2010 Corolla, Corolla Matrix, and Rav4; 2010 Highlander; 2008–2010 Sequoia; and 2007–2010 Tundra models because the sliding surface of the friction lever may become smooth during operation, which can cause condensation. This may cause the accelerator pedal to become harder to depress, slower to return, or to become stuck in a partially depressed position, which can increase the risk of a crash. Dealers will install a reinforcement bar in the accelerator pedal so it will operate smoothly.