10
questions

I replaced the relay checked the fuses. if I push the panic button the horn blows but is I push the steering column I get nothing

hello, truck in minor rearend accident. Side airbags deployed. New airbags, module and 4 door sensors replaced and dealer can't reset light. Now say wiring harness shows bad reading and needs replaced $1300 for part. I feel they are chasing their tail and not competent and just replacing everything. pls advise. Frank

Took vehicle to dealer who replaced all the modules. Now has new side curtain airbags and all modules and srs light will not reset. Dealer now states that code shows airbag wiring harness is faulty ($1300) and the reason srs light will not reset. Damage from rear end accident was a dented quarter panel and a small dent in the bumper. I have no confidence in dealerships ability after vehicle there 10 days w/o success. Please advise.

Took vehicle to dealer who replaced all the modules. Now has new side curtain airbags and all modules and srs light will not reset. Dealer now states that code shows airbag wiring harness is faulty ($1300) and the reason srs light will not reset. Damage from rear end accident was a dented quarter panel and a small dent in the bumper. I have no confidence in dealerships ability after vehicle there 10 days w/o success. Please advise.

61,000 miles, 4x4, auto trans. problem just started recently and is now permanent(will not go off)

I was trying to replace a factory bulb with an LED on the drivers side map light socket. I bent the (fragile) bulb connectors in the socket pretty bad. Is this something I can fix myself, perhaps by using precision tweezers and moving the connectors back into place? Or am I going to have to go to a shop or dealer and have the bulb socket or entire map light replaced?
I'm a novice at "auto repair", but have installed my own after-market car stereos, subwoofers, speakers, car alarms, and window regulator w/motor.

This shuddering happened several times on my way home from purchasing this truck yesterday. I've called several times with no call back as of yet. Could it be the power train control module and torque converter? it has 130,000 miles.

Blower motor makes slight whining sound on low setting.When selector knob is turned to different setting from vent forward or to floor I hear a loud flapping sound.I am able to switch to defrost and forward vents but I have no volume if air coming out of the floor vents on driver and passenger side.has new cabin air filter and also checked the squirrel cage and found no debris.

Any help would be helpful,

Thanks

my tundra has 23000 mil and had to replace my stock tires 14000 mils I was told to get a more of a square tire so I got 20" rim and now tires my alignment has never been a issue I put 9000 mils on the new tires and they are cupping and wearing on outside please help me