X

2010 Toyota Tacoma Recalls

Body, Interior & Misc.,April 9, 2014
RepairPal Expert Overview:

The steering column assembly contains electrical connections for the driver's airbag, commonly called the "clock spring". This spiral cable assembly includes a Flexible Flat Cable (FFC). Due to the shape and location of the FFC's retainer, the FFC could become damaged when the steering wheel is turned. If the FFC is damaged, the driver's airbag could be deactivated. The failure of the driver's airbag to deploy when required increases the risk of injury to the driver. When the parts are available, dealers will replace the spiral cable assembly to correct this concern.

Body, Interior & Misc.,August 7, 2013
RepairPal Expert Overview:

If the access doors are repeatedly and forcefully closed, over time the screws attaching the seat belt pre-tensioner to the seat belt retractor can loosen. If the screws loosen completely, the seat belt pre-tensioner and the retractor spring cover could detach from the seat belt retractor. If this were to occur the seat belt pre-tensioner will not perform as designed, increasing the risk of injury in a severe crash. Dealers will inspect the seat belt assembly and the screws will be secured or the seat belt assembly will be replaced as necessary.

Body, Interior & Misc.,April 9, 2013
RepairPal Expert Overview:

Vehicles have a tire size/weight rating label to inform owners of the carrying capacity of their vehicle. These models are being recalled because the incorrect vehicle weight rating is shown on the information label. This could result in vehicle and tire overloading, increasing the risk of tire failure. Owners will be provided an updated vehicle weight label to correct this concern.

Suspension & Steering,March 4, 2011
RepairPal Expert Overview:

Due to a calibration error, the tire pressure monitoring system warning light may not illuminate to warn of incorrect tire pressure. Driving with the incorrect tire pressure can result in tire failure, increasing the risk of a crash. Dealers will re-initialize the tire pressure monitoring system to restore proper operation. Toyota has not provided a notification schedule at this time.

Body, Interior & Misc.,May 27, 2010
RepairPal Expert Overview:

These vehicle were sold without the required load carrying captivity modification label. Dealers will mail the corrected label to vehicle owners. Owners have the option of requesting that the dealer install the label. This recall is expected to begin on May 27, 2010.

Body, Interior & Misc.,May 27, 2010
RepairPal Expert Overview:

Southeast Toyota is recalling 2005–2011 models for failing to comply with federal safety standards on tire selection and rims. Affected models were sold without the proper load-carrying capacity modification labels, which may cause the driver to overload the vehicle, increasing the chance of a crash. Dealers will mail the correct labels to the customer or install the label free of charge.

Drive Train,March 22, 2010
RepairPal Expert Overview:

Toyota is recalling 2010 Tacoma pickup models due to potential cracks in the propeller shaft that occurred during manufacturing. Over time, the cracks could lead to separation of the propeller shaft, which can result in a loss of control and an increase in the risk of a crash. Dealers will inspect and replace the front propeller shaft free of charge.

Body, Interior & Misc.,December 31, 2009
RepairPal Expert Overview:

Toyota is recalling 2004–2010 models for an accelerator pedal that can get stuck in the wide open position due to problems with the floor mat. This may cause high vehicle speeds that make it difficult to stop the vehicle, which can result in a crash. In order to correct the problem, dealers will replace the pedals, alter the shape of the floor, and/or replace the floor mats. Toyota will also modify software on certain models to ensure that the brake overrides the accelerator in the event that both are applied.