2000 Toyota Tacoma Problems

RepairPal has identified the most common problems with the 2000 Toyota Tacoma as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.

Refine by vehicle
Choose your vehicle
Known Problems

Toyota issued a recall on the lower ball joint due to the possibility of premature wear from improper finishing in production. The ball joints will be replaced under the recall. This recall applies to 2001-2004 models only. Please contact you local Toyota dealer to see if your vehicle is included.

At higher mileages, (125,000-150,000) the automatic transmission may not shift correctly. This can be caused by the throttle position sensor being out of adjustment or a shift solenoid needing to be replaced. Typically the transmission does not need to be completely overhauled.

The Throttle Position Sensor can get out of adjustment due to wear in the throttle body or due to carbon build up. This will cause the idle timing to advance more than 30 degrees which will cause very high HC and NOx emissions. Conversely, the Throttle Position Sensors can wear out and not properly advance the timing which causes a lack of power and poor fuel economy.

Occasionally, the Check Engine Light may come on, this can be related to a failed air flow sensor. This type of fault is commonly repaired by cleaning or replacing the air flow sensor.

The idle air control motors tend to become carboned up at around 100,000 miles and will cause a start and stall and/or stalling at stop sign problems. Many times these valves can be cleaned, however, the sure bet is to replace the idle air control motor and clean the throttle body.