2007 Toyota Matrix Problems

RepairPal has identified the most common problems with the 2007 Toyota Matrix as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.

Refine by vehicle
×
Choose your vehicle
5
Known Problems

The 2005-2008 Toyota Matrix 1.8L I4 models have issues with the circuit board in the electronic control module (ECM) cracking. There is no advanced warning for the issue, and when it occurs drivers will experience:

  • Harsh shifting
  • Possible check engine light
  • Engine stalling while driving

Toyota issued a recall for this issue, and notes the need to replace the ECU if this problem occurs. 

Drivers of the Toyota Matrix may notice excessive oil consumption between oil changes, even to the extent of the engine oil warning light displayed on the multi-function display.

This issue is known to be caused by infrequent oil changes causing engine sludge, or worn piston rings. 

The engine should be cleaned of oil sludge, and if oil consumption remains excessive, the engine may need new piston rings, or other internal components replaced. 

To avoid this issue, change the engine oil and filter every 3,000 miles, and ensure the proper grade of oil is used. 

The 2003-2008 Toyota Matrix 1.8L engine has a known issue with the valves that if left unchecked, will cause burned valves and engine performance issues. 

The engine ‘breathes’ through valves that are pushed open by the camshaft, and closed by springs. When valves are closed, they seal against a valve seat. In this vehicle, the valve seat is too soft, so after the valve contacts it thousands of times, it becomes crushed. Once it is crushed, the valve can no longer make a proper seal, and the valves erode due to extreme temperature (burnt valve).

Symptoms related to this issue:

To repair the burnt valves, the cylinder head must be removed and rebuilt, which is a costly internal engine repair, however, this issue can be prevented through inspection and adjustment of valve clearances every 40,000 miles.

The Check Engine Light may illuminate due to an evaporative emission (EVAP) system fault. Our technicians tell us these EVAP system faults can be difficult to diagnose but it is not uncommon to find a failed charcoal canister or a loose or worn gas cap.

Oxygen sensor failure may occur, resulting in the illumination of the Check Engine Light.