2006 Suzuki Forenza Problem Reports

Newest 2006 Suzuki Forenza Problem Reports

Report A Problem

The head lights may stop working due to a failed connection at the multifunction head light switch. Our technicians tell us there is a harness connector repair kit available which should be installed in conjunction with dielectric grease to seal the connector. 2004-2006 models have been recalled for low beam and daytime running light malfunctions. For more information on this recall, please click here»

A fuel odor may be noted with the source being difficult to locate. One or more of the fuel injectors may be leaking internally or externally. Our technicians tell us that revised fuel injectors are available to correct this concern.

The Check Engine Light may illuminate accompanied by a code P0133 (bank1 O2 sensor) stored in the powertrain control module (PCM). This is commonly caused by a failed air/fuel sensor. Our technicians tell us a revised a/f senor and (PCM) software upgrade may be necessary to correct this concern.

A lack of power may develop, accompanied by an illuminated Check Engine Light  with fault code P2106 stored in the powertrain control module (PCM). This fault can be caused by a throttle actuator which has only limited movement. The correction for this condition includes replacing the throttle actuator and updating the PCM software.

A hard starting condition may be due to low fuel pressure. Our technicians tell us the powertrain control module (PCM) should energize the fuel pump for 2 seconds when the ignition is turned on in order to properly pressurize the fuel system. Correcting this condition may require updating the PCM software.