Shuts off while driving on 1998 Dodge Durango

replaced computer in truck-replaced fuel pump-replaced map. Why does it still shut off while driving on highway or town?

by in Casselberry, FL on November 01, 2009
5 answers 1 comment
ANSWER by on November 01, 2009
This problem needs a diagnosis, not more guessing. Throwing parts at it is a waste of money and you actually may be adding new problems that will need to be addressed. I'm curious, how much money have you spent on trying to fix this problem?
ANSWER by on November 01, 2009
Did you try pulling the trouble code get the diagnostic.
COMMENT by on July 26, 2010
I had a similar stall problem with my 2005 Dodge Durango and it was the EGR valve, I replaced it and have not had the stalling problem again (about 3 years ago it was replaced).
ANSWER by on August 06, 2010
I konw for sure its miss fiering. The crank sensor is fulty, there is a tech tip when you replace the crank sensor to the up grade sensor the check light will blink, drive the vehical to 70 mph then let off the gas let it drop to 20 mph then stop. turn the key on then off twice with out starting the vehical that should stop the problem. this is to have the comp. to learn the miss fires........it happen to me .......hope it will make your problems a thing of the pass.
ANSWER by on October 10, 2010
My 2000 SLT V8 was having the same problem until I replaced the ignition coil. Cost was reasonable at $157.00
ANSWER by on May 10, 2011
If ur fixing urself and guessing then id change crankshaft position sensor 1st. Then id think about camshaft position sensor.
Related Items:
Car just shutsoff when coasing, taking foot of gas. No warning or anything. No check engine lights come on. Restarted right away, help!
it will not bring up any codes to tell us what needs fixed.it also tries to switch into 4wheel lock or 4 wheel low while driving.when car is off and parked u can hear it changing gears in 4 wheel d...
The temp gauge on the dashboard did not register that the truck was hot. Truck shut off and would not start back up.. after alittle while it finally did start up..But now it sputters like it wants ...
Replaced both sensors cam/shaft checked fuel power to all acc. but will not fire all relays checked and tested no spark from COP at all where do you go next ecm was replaced and still same problem....
Truck died while driving, has power everywhere except gauges do not work. Now alarm wont shut off with clicker???