Saturn Recalls

Summary:
VEHICLE DESCRIPTION: PASSENGER, SPORT UTILITY VEHICLES AND MINIVANS. THE PASSENGER AIR BAG INFLATOR MODULES WERE BUILT WITHOUT THE CORRECT AMOUNT OF GENERANT, WHICH PRODUCES THE GAS THAT FILLS THE AIR BAG. SOME WERE BUILT WITH A DOUBLE LOAD OF GENERANT AND SOME WERE BUILT WITHOUT GENERANT.
Summary:
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH AUTOMATIC TRANSAXLES. SOME OF THESE VEHICLES WERE ASSEMBLED WITH THE TRANSAXLE SHIFT CABLE CLIP MISSING OR IMPROPERLY SEATED. WITHOUT THE CLIP, THE CABLE CAN SLIP OUT OF ITS BRACKET AND THE TRANSAXLE LEVER WOULD NOT MOVE ALONG WITH THE SHIFT LEVER. THE DRIVER MAY PUT THE SHIFT LEVER IN PARK, BUT THE TRANSAXLE MAY BE IN REVERSE OR NEUTRAL.
Summary:
VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES, EQUIPPED WITH AUTOMATIC TRANSAXLES, FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 114, "THEFT PROTECTION." THESE VEHICLES WERE BUILT WITH AN IMPROPERLY ADJUSTED AUTOMATIC TRANSAXLE PARK LOCK CABLE ASSEMBLY. IF IMPROPERLY ADJUSTED, IT IS POSSIBLE TO SHIFT FROM THE "PARK" POSITION WITH THE IGNITION KEY REMOVED.
Summary:
VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 301, "FUEL SYSTEM INTEGRITY." THESE VEHICLES WERE BUILT WITH AN INADEQUATE VENT VALVE WELD ON THE TOP PORTION OF THE FUEL TANK.
RepairPal Expert Overview:

The seat belt buckles may not have been properly heat-treated during the manufacturing process. This may cause the buckles not to function correctly during a collision, which may cause injury. Dealers will replace the seat belt buckles.

Summary:
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH A SIDE IMPACT AIR BAG SYSTEM. THE AIR BAG SYSTEM HAS A LOWER SIDE IMPACT SAFING SENSOR THRESHOLD THAN SPECIFIED. BECAUSE OF THIS REDUCED THRESHOLD, THERE COULD BE AN INADVERTENT DEPLOYMENT OF THE SIDE HEAD CURTAIN AIR BAG WITH SEVERE SLAMMING OF THE DOOR.
Summary:
VEHICLE DESCRIPTION: PASSENGER VEHICLES. FUEL TANK ASSEMBLIES IN THESE VEHICLES HAVE AN OVER PRESSURE RELIEF (OPR) VALVE THAT CAN BECOME STUCK OPEN IN A FRONTAL COLLISION. IF THE VEHICLE ROLLS OVER, FUEL SPILLAGE COULD OCCUR.
Summary:
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES DO NOT COMPLY WITH REQUIREMENTS OF FMVSS NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." SOME OF THE VEHICLES WERE PRODUCED WITH SEAT BELT SHOULDER GUIDE ANCHOR BOLTS THAT WERE NOT ADEQUATELY TIGHTENED AT THE CENTER PILLAR AND COULD FALL OUT, MAKING THE SEAT BELT INOPERATIVE.
Summary:
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH A CONSOLE ARMREST FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACTS." THE ARMRESTS WERE PRODUCED WITH A LATCH THAT WILL NOT WITHSTAND THE VERTICAL FORCE REQUIREMENTS OF THE STANDARD.
Summary:
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES DO NOT COMPLY WITH REQUIREMENTS OF FMVSS NO. 581, "BUMPER STANDARD." THESE VEHICLES WERE PRODUCED WITH REAR BUMPER FASTENERS THAT MAY BE LOOSE OR MISSING.

Related Content