A Loose or worn gas cap may cause Check Engine Light to illuminate. At this time, RepairPal cannot confirm a recall for this gas cap issue.
2008 Saturn Vue Problem Reports
Most Reported 2008 Saturn Vue Problem Reports
Transmission Fault and/or Check Engine Light With Code P0716, P0776, P0717, P0777, P2714, P2715, and/or P02723
Vehicles with a 6speed automatic transmission may develop one or more of the following faults related to a broken 35R clutch wave plate inside the transmission: Illumination of the Check Engine Light with code P0716, P0776, P0717, P0777, P2714, P2715, and/or P02723, loss of reverse gear, slipping or harsh 3rd or 5th gear shift. Removal and dis-assembly of the transmission will be required to replace the broken 35R wave plate. It is also extremely important that all debris from the failed part be cleaned from the transmission while it is disassembled in order to try and prevent future problems.
The engine valve cover gaskets may develop and engine oil leak. A burning smell may be noted from the engine area if the type of leak were to occur.
These are real cheap and shame on them for even thinking saving a few pennys was worth the hassle. Cheap nozzles made of nylon are pressed in and cause bad spray or come out completely. GET REPLACED IF UNDER WARRENTY!! I have 3 times and need to again. This will be an ongoing problem.
check engine light was coming on and it was the gas cap that neede replacing. Ignition was locked and would'nt turn so it had to be replaced. The car stalled on me in the middle of driving so the perge cylonoid had to be replaced. The front end of the car was shaking and vibrating when I slowed down so the rotors had to be turned and all tires replaced. Now my car is making a humming noise when the car is in drive and accelerated. I'm going to...
Vehicles with certain V6 engines may illuminate the Check Engine Light one or more of the following codes: P0011, P0014, P0021, P0024, P0341, P0346, P0336, or P0391. Our technicians tell us that some vehicles may require a powertrain control module (PCM) software update to correct this issue. Other vehicles may have excess camshaft end play on one or both cylinder heads which will need to be corrected using special procedures outlined by GM.