Vehicles with a 6speed automatic transmission may develop one or more of the following faults related to a broken 35R clutch wave plate inside the transmission: Illumination of the Check Engine Light with code P0716, P0776, P0717, P0777, P2714, P2715, and/or P02723, loss of reverse gear, slipping or harsh 3rd or 5th gear shift. Removal and dis-assembly of the transmission will be required to replace the broken 35R wave plate. It is also extremely important that all debris from the failed part be cleaned from the transmission while it is disassembled in order to try and prevent future problems.
Car problem reports
Problem with your car? See what our experts say or submit your own.
Newest reported 2003 Saturn Vue problems
Transmission Fault and/or Check Engine Light With Code P0716, P0776, P0717, P0777, P2714, P2715, and/or P02723
A Loose or worn gas cap may cause Check Engine Light to illuminate. At this time, RepairPal cannot confirm a recall for this gas cap issue.
The engine valve cover gaskets may develop and engine oil leak. A burning smell may be noted from the engine area if the type of leak were to occur.
The day time running lights (DRL) resistor may fail causing the daytime running lights to stop working. Our technicians tell us a failed resistor will require replacement.
A burning smell may develop due to an oil leak form one or both valve cover gaskets. Resealing the valve cover will generally correct this concern. However, the valve covers should be inspected and replaced if damaged.
check engine light was coming on and it was the gas cap that neede replacing. Ignition was locked and would'nt turn so it had to be replaced. The car stalled on me in the middle of driving so the perge cylonoid had to be replaced. The front end of the car was shaking and vibrating when I slowed down so the rotors had to be turned and all tires replaced. Now my car is making a humming noise when the car is in drive and accelerated. I'm going to...
These are real cheap and shame on them for even thinking saving a few pennys was worth the hassle. Cheap nozzles made of nylon are pressed in and cause bad spray or come out completely. GET REPLACED IF UNDER WARRENTY!! I have 3 times and need to again. This will be an ongoing problem.