2.0L engines may become low on engine coolant with no cause found for the coolant loss. Our technicians tell us than in some cases the engine block may require replacement due to porosity.
Problems for specific Saab 9-3 years:
Car problem reports
Problem with your car? See what our experts say or submit your own.
Newest reported 2005 Saab 9-3 problems
When trying to close the window, the window glass will drop a few inches after reaching the closed position.This can happen on any window that has the automatic closing feature.
The system that prevents you from being injured by the automatically closing windows is called the "pinch protection system" and this system needs to be reset, reprogrammed or is defective.
In your owners manual you will find instructions on how to reset this feature. If that doesn't work, you'll need a Saab repair shop or Dealership to check for a software update for the pinch protection system, or see if there is a defective part. Have the shop reference the Saab Technical Service Bulletin (TSB #831-2639)to help address this issue.
The thermo contact in the AC compressor can fail, which means the compressor may fail to engage or disengage.
The third brake light and/or license plate lamp may fail due to wiring damaged from rubbing on the trunk lid handle. Our technicians tell us the repair involves correcting the damaged wiring and isolating the connectors so they do not contact the trunk lid handle.
A higher than normal idle speed may result in harsh transmission engagement from park to drive and/or reverse. Our technicians tell us that adjustment and reprogramming the engine idle speed should resolve this issue.
A knocking noise while turning and/or a banging noise when driving on rough roads may develop in the front suspension. This type of noise is commonly caused by a front strut thrust bearing damaged due to water intrusion. Our technicians tell us revised thrust bearings are available to correct this concern.
The shaft for the air blend door can fail creating the inability to adjust the AC or heating temperature. The AC or Heat will not maintain the proper temperature.