Reverse lights will not work on 1996 Ford Ranger

It appears that all of my lights are working except for the reverse/backup lights. They were working fine until I had the alarm system removed. Whenever they removed the components of the alarm my lights stopped working. The alarm was basic, sound and flashing lights(nothing fancy). Where should i start?

by in Houston, TX on January 12, 2010
1 answer
ANSWER by on January 13, 2010
Start by looking at all the affected wiring from the removal of the alarm, see if you see any issues with the wiring. Next, get a wiring diagram and diagnose the reverse light circuit, you may just have a bad reverse light switch, and is it possible it was bad before but you just checked after removing the alarm?
Related Items:
I already put 350$ part rebuilt my transmission stick shift and reverse light wont come on when i put in reverse nothing but it will go backwards but light wont come on have any idea? Im not going ...
i realised my back up lights were not working about two months ago i looked in the fuse box and discovered that the fuse was blown i replaced the fuse. you can put the vehicle in park ,neutral,and ...
I replaced the factory bulbs with leds in my instrument cluster and climate control panel. They are all 194 bulbs. The leds work fine in the cluster but not at all in the control panel. I reversed ...
when shift to reverse vehicle does not move. indicator lights at dash not working..
I recently had a 10A fuse blow that ran the hazard lights. When I replaced the fuse my reverse lights and third brake light do not work.

Related Content