Oldsmobile Cutlass Ciera Questions

All Oldsmobile Cutlass Ciera Questions

Ask a Question
I started the car and as soon as I turned on the lights they went off. I get no interior lights, head lights, no break lights and the abs light came on. the electrical on this car is a mes. Can you help or tell me wha...
Beginning in 1994, GM began the migration to the ultimate goal of all vehicles being OBD-II compliant, and my Oldsmobile is in the 20% or so that were sent over prior to 1996. Actually, it is a hydrid, mostly OBD_II c...
previous owner lost a tire while going down the freeway and the car hit the ground and since then the car will not work in any gear, but if you unplug the solenoid it will work in forward gears only but will not move ...
and if i do have a spark plug that is cracked and difficult to remove how do i go about that?
it shuts off while running andd the it stalls a few times and eventually turns back on
How do I get my car hood opened when the latch on the inside jas broken away from the cable wires?
I recently replace my car stereo and the two rear speakers, I am hearing some static ,it seems to be coming from the drivers door. Are there speakers in the doors of this car? and do they need replaced also?
the light only comes on after a few minutes on the hi-way (only driven on hi-way work car) the light goes off if l speed up or slow down after l resume cruising speed it comes on l put it in the shop he said lean fuel...
It is slow moving from a stop. I have to put it in 1st gear and manually shift it. Up until yesterday that worked. Now it just creeps. I'm thinking transmission modulator. That's the cheapest thing to fix and we are a...
it turns over but just won't fire. i drove it yesterday just fine but it sat over night and got cold and now it won't start. we tried ether there's heet in the fuel. only happens in the winter.
1986 model with 80,ooo mi. runs ok but ideals ruff at stop lights and dies when I pull into or out of a parking place. No sign of coolent in oil but radiator must have a small leak because I have to add coolant on a r...
cooling fan is not working at all
cat.converter. will run for a while then die. a mechanic told me that the gas is running to rich and might be an electrical problem?? any help??
airconditioner works.what is this fan for?SEEMS LIKE SECONDARY ONE and was right in front of engine. it is not the fan behind rad.
changed the plugs and wires in the car yesterday..... now it runs poorly. found one plug wasnt sparking as good as the rest and put an old one in. ran better but still bad. found a firing order diagram and i had 3 and...
When I put gas in the car both left/right gas lines leaks. Also the fuel gauge is not working any answers to why. Great car but I know it will not last much longer 139,000 miles.
Was drining at 75mph heard & felt bang under hood then engine revving with smoke then idled noisily while in gear, won't drive, but starts, shifter moves but wont go into gear. All fluids look full, but I know the tra...
firat time it happen i was driving it was driving fine got home park it went back out it crank didnt turn over so i took plugs out clean then try it sgian cranked but would not crank over the i pump the gas peddle sti...
sorry from my first question I ment the engine light not coming on
car was running fine then a hour later car wouldn't crank over then couple hours later it started and running rough took it to garage said just needed plugs and wires .and fuel filter so had that done the left ran fin...
i took my car in and they said that i was leaking oil so bad because i need a new oil pan and oil gasket so i need to know how to go about changing out the pan myself. thanks!
One of the 4 relays is causing this car to not start right. It also turns the cooling fan on makes a horrific clicking sound and when wiggled effects door bell sound along with dash lights to flash which of them could...
new fuel pump and newer spark plug and wires
a friend whos rarely free toook it off so i could get it tested now hes now were to be found and i must put this back on i dont want to connect wires wrong or assemble wrong