Mazda B2600 Questions
Answered Mazda B2600 Questions
Ask a Question
I have one ticking lifter.I removed the valve cover to take a looknd sure enough the exhaust valve on the #2 cyclinder is the problem looks like the plunger where you set the lash is stuck or clogged.Is there a way to...
Just put a new clutch n pressure plate in and now it wont go in gear.only does when engine is off.
Do I have to remove the whole grille and if so how is the grille connected at the bumper?
what should I b lookin for
I have a b2600i, pulling each plug wire causes no change to r.p.m. on cylinders 3 and 4. 150 lbs. compression all cylinders. New fuel filter, plugs, wires, rotor and cap.
Just bought truck, but was told this power loss happened quickly. All I replaced was the mismatched set of plugs with new correct.
will turn over but won't fire - distributor assembly has been replaced
Using a spray bottle, as long as I spray gas into the throttle body it runs fine. I put light on the injector powers and when they light up it try's to run. Help!
plunger may have broke
4x4 with 200Kmi. When backing up, the truck "hops" - that is it jerks violently. There is no hopping when moving forward.
I poured head gasket sealant in the the radiator now its making a loud tapping noise.
The battery died so put a new one on. Still wouldn't crank. Put a on a coil and a distributor and truck still will not crank. What do you suggest next?
overdrive light keeps blinking and when i press on the overdrive switch it still won't shift gears. Engine seems hotter then normal but no overheating problems. Should i replace the thermostat or radiator?
Only when its cold once it heats up it fades away, i got oil in it
I have had my truck for a little over a month and a half and it has quit while i was driving it three times in the past 2 weeks. I had it towed into a mechanics shop the day after it happened the first time, and it ra...
A/C expansion value location
Ok, about a 2-3 weeks ago, my boyfriend and I went to go start our truck one morning. It started and ran for like 5 seconds, but then just shut off. We tried and tried to get it going again, but it still wouldnt start...
The person who owned it before me use to slam it real hard into gear, is there a way i can adjust the shifting forks or whatever the problem is without buying a new transmission
Wiring harness, wiring harness is getting power, i plug them in, fuel pump doesn't work
Hard to find computer for this year, only get one for $250 should I purchase has anyone had luck with these?
i have checked everything that i can think of
it runs great it just burns gas
i can spray starting fluid and it will start and run. turn the truck off and it will not start on its own. you will have to start it with fluid again.55 lbs fuel pressure.have spark.............
no start installed new dis ,coil ,plug ,and wires still no spark does this truck have a main relay? any ideas what up
1993 B2600i g6 f/i asperated motor. overheated, blew head gasket. replaced but now wont start. im very sure all setting are correct, but never hurts to check. with crank at tdc 0 were should the cam sprocket be locate...
the mazda bravo was starting and you could drive it but when you turn it off it will not start, have changed the spark plugs, rota coil and auto fuel pump it started for abit and now it wont start andy ideas.
How do you change the front CV axle on a 4x4 Mazda B2600i??
After alarm was install my brake and anti lock lights stay on. But the weird thing is that when u press the clutch switch in they go off
my headlights (low beams)do not work if i pull on the highlight control it does come on i cant do this while i drive please tell me how do i replace my headlight switch