GMC Sonoma Questions
Answered GMC Sonoma Questions
Ask a Question
Mostly when passing or climbing hills
Truck died rollin down the rd. Turned ignition off and when turned back on didn't hear the fuel pump kick on before turning over as I usually do...replaced fuel pump...no power. Figured it must be the fuel pump sendin...
After it act like its run out of gas flip key on and off 2 or 3 times, starts and takes off
I've replaced fuel pump, fuel strainer, fuel filter , plugs , wires,distributor cap and rotary button and air control valve .it doesn't have a catalytic converter on it and I've cleaned injectors and all. But you can ...
I replaced the plugs and wires distributor cap rotary button fuel pump strainer and the pump and it still acts if it has s piece of trash in the injector and and even cleaned that out .so what else can it be.
While in the shop they replaced my distributor, dist cap, rotor button, coil, plugwires, starter and intake manifold gasket.
noise gets smaller but dont go away, started all at once,what should i check? or change engines if so what enter changes with a 2.2 flex fuel ty for any help
With engine off have some pedal. Start engine and pedal goes to floor. Replaced vacuum booster and master cylinder(rebuild). Bench bled master cylinder and all 4 wheels to no avail. Truck is V-6 4-wd with 4-wheel...
it sounds like a roaring sound thru the revolution while im driving.it starts making the roaring sound and sounds like something loud sounds like the brakes are stuck or something but I put all new brakes roters calip...
I changed the driver side wheel bearing but coming to find out its the passenger hub assembly!!!its 4x4 wanting to kno if the hub assembly inter changeable !!!
the light on the 2hi lights up but when I want to sitch it to 4x4 when I push 4hi or 4lo it wont change nor will it engagw
change the brake,checked the fluid its full,check the emergency brake it works and its not to tight or to loose
I have a 2001 Sonoma 4.3L. Recently bought the truck and didn't have an issue with it when I got it or for a couple days infact. My driveway is about a 30 degree hill and once I parked the truck and put it into park t...
I recently replaced my radiator including oil supply lines and it is now leaking oil at the connection of the top of the radiator. What could be the problem?
HAVE REPLACED THE IGNITION SYSTEM SUCH AS PLUGS,PLUG WIRES, ROTOR AND CAP , DISTRIBUTOR PICK UP , NO EXTERNAL VACCUM LEAKS .
Replaced slave cylinder and blead twice but I can't get pressure to the pedal, I can start in first and float gears, but can't put into gear from neutral.doesn't even grind unless I try reverse. What else can it be or...
The truck was turned off at gas station, went to turn back on and wouldn't go into gear while idiling. Had to start in first and float it home, replaced the slave cylinder and it started and went into gear, with drive...
won't start replaced starter and still nothing? jumped it by bypassing with cyleniod at which it started but starter didn't dissangage
This is a 1999 GMC Sonoma 2.2 4cylinder engine,both of these quit working at the same time.
Should the iol pump be changed or not??
Just changed the fuel pump, fuel filter, and flushed radiator. Ran fine for a day then this. Checked vacuum lines and they are fine check engine light on as well.