Chevrolet Camaro Questions

Answered Chevrolet Camaro Questions

Ask a Question
View:RecentAnsweredUnanswered
add a bigger cam and put some 350 head on it is that possible?
Computer says number 6 cylinder needs replacement. Not sure where it is located. Please help.
need to change a barring on a compressor for a 1999 chevy camaro v6 3800 .. i need a repair manual or a video please
While replacing my clutch it is noticed that there is play (i can move it back and forth) in the crankshaft. I had no noise in the engine before I started the clutch replacement. Is this normal? What do I do to fix...
fuel pump comes on when key is turned on and runs when the relay is triggered manually. im thinking crank sensor?
I replaced driver side oxy sensor and cleared the code car runs much better, but light came back on. Also on same fail is three blinking blue dots. Can only remember one. Its for an oxy sensor heat modulator. ?? What...
My car will start one day and not the next. It will remote start, but turn off once I put the key in and turn. No codes at all. What do I do?
power steering fluid has been flushed and replaced. Power steering belt looks ok. car is started and warmed before driving, but PS failure occurs at first complete stop within feet from house.
This only happens when its cold so far 1zt time it would not start for 3 days till it warmed up and it will not start now its a brand new alternator and battery so i know its not that any help is grsatly appreciTed
had engine pulled 10 months ago for $4300 cleaning and sealing all leaks and now being told crankshaft has gone and to pay $2500 to replace block on just pulled and cleaned engine because they could not forsee cranksh...
I recently had my spark plugs changed and now I have a loud knocking sound coming from my engine. I fear I may need to replace a piston or rod.
no heat at times,feels like the air condition is on, than heat comes back on, back and forth. temperture max out(needle sticks on "H" than goes back down to normal. all this takes place less than 7 miles of travel.
Started engine had no tranny fluid flowing pressure. Thought maybe I didn't seat torque converter so I pulled tranny out and made sure it was seated. Think maybe I didn't have it right the first time. Still no pressur...
ive already looked for leaks but dont see any
i need to do a head repair
My MAF sensor is new and clean I'm hoping it's just the connector or a vacuum leak.
the PASS key or some godforsaken mystery in the Hidden Theft Deterrent system. Everybody I speak with says take it to a Dealership. I'll run it off a cliff 1st. Black on black w/T-Tops ran good looks like a vet from d...
I brought my 1999 Camaro to Chevy to flash a replaced ECM but I forgot to tell them that it has a 2000 engine in it. It will crank but won't stay running now.