Volvo Problem Reports

Newest Volvo Problem Reports

Report A Problem

Engine stalling/stumbling problems can be caused by a failing mass air flow sensor.

Engine drivability problems can be caused by a failing mass air flow sensor.

The engine may not start due to a failed starter control module. If the module has indeed failed, it will require replacement.

The engine may not start due to a failed starter control module. If the module has indeed failed, it will require replacement.

The mass air flow sensor may fail resulting in poor engine performance and illumination of the Check Engine Light.

The front control arm bushings wear out, resulting in alignment issues and squeaking and/or knocking noises from the front end. Worn bushings will require replacement.

The front control arm bushings wear out, resulting in alignment issues and squeaking and/or knocking noises from the front end. Worn bushings will require replacement.

The front control arm bushings wear out, resulting in alignment issues and squeaking and/or knocking noises from the front end. Worn bushings will require replacement.

The front control arm bushings wear out, resulting in alignment issues and squeaking and/or knocking noises from the front end. Worn bushings will require replacement.

The front control arm bushings wear out, resulting in alignment issues and squeaking and/or knocking noises from the front end. Worn bushings will require replacement.

The front control arm bushings wear out, resulting in alignment issues and squeaking and/or knocking noises from the front end. Worn bushings will require replacement.

 

The front control arm bushings wear out, resulting in alignment issues and squeaking and/or knocking noises from the front end. Worn bushings will require replacement.

Several issues occur with the door locks on the Volvo C70 and most are because of the door lock assembly. What happens is that one door will not lock while the other one does. In other cases you will lock the doors and then one of the doors will immediately unlock.

The problem is that the door lock assembly is defective and will need replacement. Replacement of this assembly on the C70 is very difficult and is not recommended by a novice. Getting the door and window aligned properly so that you don't get air or water leaks is very, very difficult.

The gear position sensor on the transmission may fail, resulting in illumination of the Check Engine Light and/or a no start condition.