The variable valve timing camshaft actuators may stick due to dirty engine oil or a faulty control solenoid. A sticking actuator may cause a rough idle and the Check Engine Light to illuminate. Our technicians tell us the engine oil should be checked to make sure it is clean and at the proper level before replacing any parts to correct this concern.
Oldsmobile Bravada Problem Reports
RepairPal Verified Oldsmobile Bravada Problem Reports
The CD player in the radio may fail. Our technicians tell us that the radio will need to be removed and sent out to a radio repair shop to correct this condition.
One or more of the rear lights may be out due to a failed light socket plate. Our technicians tell us some 2002-2004 models were recalled for this issue. For more information on this recall, please click here»
The heater core under the right side of the dashboard may leak engine coolant which can puddle on the passenger front floor. The loss of coolant may cause an engine overheating condition. Our technicians tell us that removal of the dash board is necessary to replace the heater on these vehicles.
A coolant leak may develop from the water pump. This can result in an engine overheating condition. A leaking water pump will require replacement.
On vehicles with intermittent windshield wipers, the wiper motor circuit board may fail and cause the wipers to stop working at times. Replacing the circuit board should resolve the issue. Some vehicles were recalled for this problem and some were not. You will need to check with your local dealer to find out if a specific vehicle was included.
The power door locks may stop working in one or more doors due to a failed actuator. Replacement of the failed actuator should correct this concern.
The fuel level sensor in the fuel tank may fail causing erratic fuel gauge operation. Our technicians tell us that on high mileage vehicles you may wish to replace the complete fuel pump module assembly if this condition occurs.
It is common for the fuel level sensor in the fuel tank read the fuel level incorrectly. The sensor must be replaced to correct the condition. Our technicians recommend having the complete fuel pump module replaced on high mileage vehicles.
The alternator may fail, causing a "no charge" condition. An internal bearing may also fail and cause an abnormal noise. If the vehicle is driven too long with a failed bearing, the alternator may stop turning, which can cause the serpentine belt to break or the engine to stall and not turn over.