Mitsubishi Galant Problem Reports

RepairPal Verified Mitsubishi Galant Problem Reports

Report A Problem
View:Most ReportedNewestRepairPal Verified

The crankshaft position sensor may fail causing a no start and/or stalling condition. Replacement of the failed sensor will generally corrects this concern.

The Check Engine Light may illuminate with no fault confirmed. Our technicians tell us a powertrain control module (PCM) software update is available which may correct this concern.

The automatic transmission may develop a 2-3 shift flair. This is commonly caused by an internal fault related to the reverse clutch assembly. Replacement of the rear housing and reverse clutch assembly may be required to correct this concern.

A noise may develop from the steering column, this is commonly caused by the turn signal cancel cam which may require replacement.

The engine may develop an engine pinging issue. Reprogramming of the powertrain control module (PCM) may be required to correct this concern.

The water shut motor may fail. This motor controls coolant flow to the heater core. Replacement of the failed part will be necessary to correct this issue.

The power windows may fail, often related to moisture inside the door. Affected components will need to be replaced. If possible some type of moisture protection could be added to try and prevent repeat failures.

Premature automatic transmission failures have been noted, often requiring overhaul or replacement of the transmission.

The automatic transmission may fail prematurely. Transmission overhaul or replacement may be necessary to correct this concern.