Mercury Villager Problem Reports

Newest Mercury Villager Problem Reports

Report A Problem

A coolant leak may develop from a plug on the front of the rear cylinder head, behind the timing cover.

The distributor shaft bearing can become rusty, and seize causing the engine to stall or not start. The failed distributor will commonly require replacement.

The fuel injectors can fail and cause drivability problems. Often there is no Check Engine light and the failures can be caused by corrosion of the connector, clogging beyond the point of cleaning, and/or internal failures.

The exhaust manifold often warps and cracks, breaking off the studs between the cylinder head and the exhaust manifold. A ticking type noise may be noted most noticeable when the engine is cold.