Mercury Problem Reports

Newest Mercury Problem Reports

Report A Problem

The rear wiper may stop working. This could be due to a rear wiper motor that has failed requiring replacement.

If you experience difficulty starting the engine when cold, stalling at idle, or hesitations during acceleration, it may be the idle air bypass valve. This valve helps the vehicle idle steady when the accelerator pedal is not pressed.

If you experience difficulty starting the engine when cold, stalling at idle, or hesitations during acceleration, it may be the idle air bypass valve. This valve helps the vehicle idle steady when the accelerator pedal is not pressed.

If you experience difficulty starting the engine when cold, stalling at idle, or hesitations during acceleration, it may be the idle air bypass valve. This valve helps the vehicle idle steady when the accelerator pedal is not pressed.

If you experience difficulty starting the engine when cold, stalling at idle, or hesitations during acceleration, it may be the idle air bypass valve. This valve helps the vehicle idle steady when the accelerator pedal is not pressed.

If you experience difficulty starting the engine when cold, stalling at idle, or hesitations during acceleration, it may be the idle air bypass valve. This valve helps the vehicle idle steady when the accelerator pedal is not pressed.

While steering, if you hear a clunk or a rattle, or if you experience premature tire wear, this could indicate the inner tie rod ends are loose or worn and will require replacement.

While steering, if you hear a clunk or a rattle, or if you experience premature tire wear, this could indicate the inner tie rod ends are loose or worn and will require replacement.

While steering, if you hear a clunk or a rattle, or if you experience premature tire wear, this could indicate the inner tie rod ends are loose or worn and will require replacement.

The distributor shaft bearing can become rusty, and seize causing the engine to stall or not start. The failed distributor will commonly require replacement.

The Check Engine Light can illuminate with codes due to the lack of EGR (exhaust gas recirculation) flow caused. This is commonly a result of a clogged passage in the intake manifold. To correct this problem, the EGR valve has to be removed and the passage cleaned thoroughly. Partial restriction of this passage can cause smog test failures for the NOx emissions without causing a drivability symptom.

The Check Engine Light can illuminate with codes due to the lack of EGR (exhaust gas recirculation) flow caused. This is commonly a result of a clogged passage in the intake manifold. To correct this problem, the EGR valve has to be removed and the passage cleaned thoroughly. Partial restriction of this passage can cause smog test failures for the NOx emissions without causing a drivability symptom.

The Check Engine Light can illuminate with codes due to the lack of EGR (exhaust gas recirculation) flow caused. This is commonly a result of a clogged passage in the intake manifold. To correct this problem, the EGR valve has to be removed and the passage cleaned thoroughly. Partial restriction of this passage can cause smog test failures for the NOx emissions without causing a drivability symptom.

The Check Engine Light can illuminate with codes due to the lack of EGR (exhaust gas recirculation) flow caused. This is commonly a result of a clogged passage in the intake manifold. To correct this problem, the EGR valve has to be removed and the passage cleaned thoroughly. Partial restriction of this passage can cause smog test failures for the NOx emissions without causing a drivability symptom.

Various problems with the 5-speed automatic transmission were common. These problems can be more common on the 2002 models with build dates before March, 2002. There are many service bulletins describing the diagnoses and repairs, which include fluid leak repairs, transmission software updates, or internal failures requiring a costly repair.