Lexus Problem Reports

RepairPal Verified Lexus Problem Reports

Report A Problem
View:Most ReportedNewestRepairPal Verified

Intermittent failure of a purge control valve in the evaporative emission system can cause the Check Engine Light to illuminate. A failed valve should be replaced to correct this problem.

 

When changing the air filter, it is easy to knock off a hose on the air filter housing, which is part of the emission control system. If the vehicle is driven with this hose disconnected, the Check Engine Light will illuminate.

There are reports of LED problems in the dashboard gauges. The lights burn out, making the gauges difficult to see at night, and require replacement.

The sunroof may not close correctly or jam due to alignment issues. Our technicians tell us a wind deflector kit is available to correct this issue.

The remote engine start function will not operate in extremely cold temperatures (-22 degrees F and lower). Our technicians tell us no repair should be attempted, this is normal operation for the remote engine start system in this vehicle.

The remote engine start function will not operate in extremely cold temperatures (-22 degrees F and lower). Our technicians tell us no repair should be attempted, this is normal operation for the remote engine start system in this vehicle.

The heater in the climate controlled seat may stop working after 5-10 minutes of use. Our technicians tell us an updated seat climate controller is available to correct this concern.

A squeak type noise may develop from the rear brakes. Our technicians tell us revised brake pads are available to correct this concern.

The Check Engine Light may illuminate with an engine misfire code stored (P0300 - P0306). Our technicians tell us upgraded software is available for the powertrain control module (PCM) which may correct this concern.

The Check Engine Light may illuminate after a cold start with an engine misfire code stored (P0300 - P0306). This condition can be caused by faulty valve lash adjuster and/or valve spring. Our technicians tell us that revised parts are available to correct this concern.

The Check Engine Light may illuminate due to an O2 sensor heater fault. Most commonly the affected O2 sensor will need to be replaced to correct this concern.

The Check Engine Light may illuminate due to an O2 sensor heater fault. Most commonly the affected O2 sensor will need to be replaced to correct this concern.

The Check Engine Light may illuminate due to an O2 sensor heater fault. Most commonly the affected O2 sensor will need to be replaced to correct this concern.

Various radio issues may develop, including: volume control, radio shuts off by itself, or the radio screen is scrambled or blank. Our technicians tell us an improved radio is available to address these concerns.

Our technicians tell us that GPS errors that may develop can generally be correct by installing an updated Navigation map disc..