Jeep Wrangler Problem Reports

Newest Jeep Wrangler Problem Reports

Report A Problem
Side bars located near the door opening (on the sunrider soft top) may break or a pivot link may break. There are pivot links and side bars available so a complete soft top assembly may not be needed for the repair.
The hood support rod can rattle against the radiator driving over rough roads or when the doors are slammed. Installing a foam ring on the support rod can help to prevent the rattling.

A loud buzzing or whining when the transmission is in reverse may be caused by a regulator valve in the transmission valve body. A revised valve was released that does not resonate. Careful diagnosis should be performed because other causes can create the noise.

A cleaner/lubricant is available from Mopar for when the soft top window zippers become stiff or difficult to move. Our technicians note this product works very well when the directions are followed properly.
If the fuel gauge is inaccurate or not working, it may because the fuel tank has bowed upward and interfered with, or damaged the sending unit (fuel level sensor). If the fuel tank has bowed, fuel tank replacement will be needed.

Jeep issued a recall on the ignition switch because the switch could short-circuit in the presence of water or impurities.

If the fuel gauge is inaccurate or not working, it may because the fuel tank has bowed upward and interfered with, or damaged the sending unit (fuel level sensor). If the fuel tank has bowed, fuel tank replacement will be needed.

2.5L 4 cylinder
If the power steering pump pulley is not installed in the correct position on the pump shaft, the drive belt may make a chirping noise and sound as though it is coming from another component.