Honda Problem Reports

RepairPal Verified Honda Problem Reports

Report A Problem
View:Most ReportedNewestRepairPal Verified

A Check Engine Light may illuminate if the EGR ports have clogged or if the catalyst inside the catalytic converter has deteriorated.

Excessive second clutch wear (automatic transmission) can cause the car not to move and set a Check Engine light (MIL). Replacing the transmission is necessary when this happens.

On some models a faulty Idle Air Control (IAC) valve can cause an engine surge at idle and set a Check Engine Light (MIL). Replacing the faulty IAC valve will commonly correct this problem.

On some models the powertrain control module (PCM) software delays idle speed changes during cold starts causing stalling problems. A software update from Honda will repair this particular issue.

On certain models the drivers seat bushings can wear out and the seat can rock back and forth. Replacing the bushings are needed to repair this issue.

On certain models the drivers seat bushings can wear out and the seat can rock back and forth. Replacing the bushings are needed to repair this issue.

On certain models the drivers seat bushings can wear out and the seat can rock back and forth. Replacing the bushings are needed to repair this issue.

On certain models the drivers seat bushings can wear out and the seat can rock back and forth. Replacing the bushings are needed to repair this issue.

On certain models the drivers seat bushings can wear out and the seat can rock back and forth. Replacing the bushings are needed to repair this issue.

A faulty brake master cylinder reservoir filter can cause the brake system indicator to illuminate after a cold start and then go off. Replacement of the reservoir filter will commonly fix this problem.

A faulty brake master cylinder reservoir filter can cause the brake system indicator to illuminate after a cold start and then go off. Replacement of the reservoir filter will commonly fix this problem.

A faulty brake master cylinder reservoir filter can cause the brake system indicator to illuminate after a cold start and then go off. Replacement of the reservoir filter will commonly fix this problem.

A faulty brake master cylinder reservoir filter can cause the brake system indicator to illuminate after a cold start and then go off. Replacement of the reservoir filter will commonly fix this problem.

A faulty brake master cylinder reservoir filter can cause the brake system indicator to illuminate after a cold start and then go off. Replacement of the reservoir filter will commonly fix this problem.

Excessive oil consumption can cause a low oil level condition, which can result in illumination of the Check Engine Light.