Honda Civic Hybrid Problem Reports

RepairPal Verified Honda Civic Hybrid Problem Reports

Report A Problem
View:Most ReportedNewestRepairPal Verified

The IMA light coming on is usually caused by a battery pack that is no longer charging correctly. Replacing the battery pack will turn off the IMA light.

On certain models the drivers seat bushings can wear out and the seat can rock back and forth. Replacing the bushings are needed to repair this issue.

On certain models the windshield wipers will not park in the proper place or won't shut off. The wiper motor must be replaced to repair this issue.

The brake pedal may feel hard after a cold start at higher altitudes. Our technicians tell us replacing the power brake booster and updating the computer software should correct this concern.

A harsh engagement of the automatic transmission may be noted after the engine auto stops. A software update for the powertrain control module (PCM) / constantly variable transmission (CVT) is available which may correct this issue.

Worn door locks (tumblers) can cause the lock not to work. Removing the lock and replacing the worn parts (tumblers) is needed to get the lock working again.

A vibration may be felt in the steering wheel upon brake application. Our technicians tell us that this condition is generally caused by warped front brake rotors. Replacement or re-machining of the faulty rotors will be necessary to correct this issue.

A fluid leak may develop from one or both front suspension struts. Replacing the struts (usually in pairs) will be necessary to take care of the problem.

In some cases drive belt noise can be heard from the passenger compartment. Installing a new updated belt from Honda and rerouting the belt is needed will commonly correct this noise issue.

Plugged moon roof drains can cause a water leak inside the car, usually over the head of the driver or passengers head when turning a corner. Cleaning the drains will fix this problem.

On Certain models a faulty power window switch can cause the power windows to work or not work intermittently.

Damaged engine mounts can lead to vibration and roughness felt in the steering wheel. A rattle in the dash and engine area may also be heard. Replacement of damaged mounts will commonly correct these issues.

The air/fuel sensor, located in the exhaust system, may be damaged by moisture in the exhaust resulting in illumination of the Check Engine Light. Replacing the damaged air/fuel sensor and updating the powertrain control module (PCM) software should correct this concern.

Front compliance bushings may crack and break. Damaged bushing should be replaced before damaged is done to suspension components.

On some models the bump stop in the strut can cause a noise on turns. Replacement of the bump stop will fix this problem.