» »

Problems for specific Dodge Sprinter 3500 years:

Car problem reports

Report A Problem

Problem with your car? See what our experts say or submit your own.

Repairpal verified Dodge Sprinter 3500 problems

 

Verified for the Dodge Sprinter 3500

The shift lever may not move out of park. Our technicians tell us that updating the electronic shifter module (ESM) may be necessary to correct this concern.

6 Reports
Me Too

Verified for the Dodge Sprinter 3500

The intake temperature sensor may fail resulting in illumination of the Check Engine Light and various driveability concerns. Our technicians tell us the intake air temperature reading on the scan tool should be within 10 degrees F of the actual ambient temperature, if it's not the intake temperature sensor should be replaced.

3 Reports
Me Too

Verified for the Dodge Sprinter 3500

Some vehicles may develop a musty odor coming from the HVAC system, Dodge has issued a cleaner/disinfectant and a coating for the evaporator designed to inhibit bacterial growth.

6 Reports
Me Too

Verified for the Dodge Sprinter 3500

The crankshaft position sensor on diesel engines may be subject to a recall. Failed crankshaft position sensors may result in a stalling or no start condition.

1 Report
Me Too

Verified for the Dodge Sprinter 3500

A transmission fluid leak may be noted from the area of the 13 pin electrical connector. Replacing the guide bushing and o-ring seal should correct this issue.

4 Reports
Me Too

Verified for the Dodge Sprinter 3500

Rust and/or corrosion may develop on the quarter panel above the tail lamp assembly due a void between the tail lamp and the body. Our technicians tell us the repair involves removing the rust and applying sealant to fill the void.

2 Reports
Me Too

Verified for the Dodge Sprinter 3500

EVAP system faults may occur which can cause the Check Engine Light to illuminate. Our technicians tell us that checking the purge solenoid for debris or carbon particles, careful inspection of the EVAP hoses for cracks, and testing the gas cap are all necessary steps to begin to confirm the integrity of the EVAP system.

4 Reports
Me Too

Verified for the Dodge Sprinter 3500

False or unrelated trouble codes in the engine control module (ECM) and/or anti-lock brake module (ABS) may be caused by a brake light bulb issue or corrosion in the bulb socket or trailer harness connector. Our technicians tell us all bulbs should be inspected for correct function and application. Also, all related sockets, connectors, and circuit boards should be checked for corrosion if this issue occurs.

4 Reports
Me Too

Verified for the Dodge Sprinter 3500

Automatic transmissions may develop shifting concerns or a shudder condition. Our technicians tell us the shudder condition may be caused by transmission fluid level or quality. The shifting concerns may be caused by a faulty transmission control module (TCM).

4 Reports
Me Too
Ask a Question
More about this car