Chrysler LeBaron Problem Reports

Newest Chrysler LeBaron Problem Reports

Report A Problem

A tappet/lash adjuster noise may be noted from 3.0L engines. Our technicians tell us that proper testing of the valve lash adjusters should be performed before replacing any parts. A full crankcase of clean engine oil is necessary before determining if any lash adjusters are bleeding down and causing a noise concern.

The connector on the input and/or output speed sensors on the automatic transmission may become damaged causing intermittent loss of speed control. There are wiring repair kits available to repair this issue.

Incorrect, worn, or contaminated automatic transmission fluid can cause shifting issues, noted at speeds over 40mph. Our technicians tell us that repairs to correct this condition include changing the fluid and filter, driving the vehicle for 10miles and changing the fluid a second time.

The connector on the input and/or output speed sensors on the automatic transmission may become damaged causing intermittent loss of speed control. There are wiring repair kits available to repair this issue.

Automatic transmissions can exhibit a variety of shifting and noise concerns due to failure of internal parts. Our technicians tell us that a complete inspection of all internal parts should be performed if the transmission is disassembled for overhaul. Numerous updated part are available for this transmission.

The anti-lock brake (ABS) warning lamp may illuminate with "Modulator Fault" indicated by a scan tool. This would indicate a electrical fault, commonly caused by a faulty connection. ABS connectors should be inspected for problems if this situation occurs.