Buick Problem Reports

RepairPal Verified Buick Problem Reports

Report A Problem
View:Most ReportedNewestRepairPal Verified

A door window may move slowly or stop in mid travel due to a failing power window motor. The affected window may start working again after the motor cools off. Replacing the faulty window motor will commonly correct this concern.

A door window may move slowly or stop in mid travel due to a failing power window motor. The affected window may start working again after the motor cools off. Replacing the faulty window motor will commonly correct this concern.

A door window may move slowly or stop in mid travel due to a failing power window motor. The affected window may start working again after the motor cools off. Replacing the faulty window motor will commonly correct this concern.

The steering wheel position sensor may fail, resulting in the service stability message being displayed.

The steering may develop a clunk type noise from the upper intermediate steering shaft.  Our technicians tell us that you should check with your local GM dealer to find out what the latest repair is for this condition.

The steering may develop a clunk type noise from the upper intermediate steering shaft.  Our technicians tell us that you should check with your local GM dealer to find out what the latest repair is for this condition.

The Engine Control Module (ECM) can fail causing stalling, and engine and transmission drivability concerns.

The high pressure power steering hose will commonly leak fluid; it should be replaced.

The high pressure power steering hose will commonly leak fluid and should be replaced if this is the case.

The Engine Control Module (ECM) can fail causing stalling and various other engine & transmission drivability concerns.

The intake manifold and valve cover gaskets can develop external engine oil leaks.

The steering may develop a clunk type noise from the upper intermediate steering shaft.  Our technicians tell us that you should check with your local GM dealer to find out what the latest repair is for this condition.

The water pump and/or the plastic side tanks on the radiator may leak causing a loss of coolant. The engine may overheat due to coolant loss. Continued coolant loss after external leaks have been repaired could indicate a blown head gasket.

An engine oil leak may develop from the front crankshaft seal. Our technicians tell us a revised front crankshaft seal is available to correct this concern.

Vehicles with certain V6 engines may illuminate the Check Engine Light one or more of the following codes: P0011, P0014, P0021, P0024, P0341, P0346, P0336, or P0391. Our technicians tell us that some vehicles may require a powertrain control module (PCM) software update to correct this issue. Other vehicles may have excess camshaft end play on one or both cylinder heads which will need to be corrected using special procedures outlined by GM.