Buick Problem Reports

Newest Buick Problem Reports

Report A Problem

Vehicles with a 6speed automatic transmission may develop one or more of the following faults related to a broken 35R clutch wave plate inside the transmission: Illumination of the Check Engine Light with code P0716, P0776, P0717, P0777, P2714, P2715, and/or P02723, loss of reverse gear, slipping or harsh 3rd or 5th gear shift. Removal and dis-assembly of the transmission will be required to replace the broken 35R wave plate. It is also extremely important that all debris from the failed part be cleaned from the transmission while it is disassembled in order to try and prevent future problems.

Do to a low or erratic voltage condition, the fuel gauge needle may "jump" around and become stuck on the back side of the "stop" below the "empty" indicator. This does not mean the gauge is broken. If the gauge cover is removed and the needle is gently moved back around to the correct side of the pin, the gauge will again function normally. When the needle is moved back to the correct position, the electrical problem that caused the needle to jump in the first place must be corrected or the needle may jump around again. The most common problems that cause this condition are a weak battery or corrosion on the battery cable ends.

Illumination of the Check Engine Light may be the result of a loose or worn gas cap.

Illumination of the Check Engine Light may be the result of a loose or worn gas cap.

Illumination of the Check Engine Light may be the result of a loose or worn gas cap.

Illumination of the Check Engine Light may be the result of a loose or worn gas cap.

Illumination of the Check Engine Light may be the result of a loose or worn gas cap.

Illumination of the Check Engine Light can be caused by a loose or worn gas cap.

Illumination of the Check Engine Light can be caused by a loose or worn gas cap.

Illumination of the Check Engine Light can be caused by a loose or worn gas cap.

Illumination of the Check Engine Light can be caused by a loose or worn gas cap.

Illumination of the Check Engine Light can be caused by a loose or worn gas cap.

Illumination of the Check Engine Light can be caused by a loose or worn gas cap.

Illumination of the Check Engine Light can be caused by a loose or worn gas cap.

Illumination of the Check Engine Light can be caused by a loose or worn gas cap.