Buick Problem Reports

Newest Buick Problem Reports

Report A Problem

A weak battery or a burned out brake light bulb may cause the ABS light to illuminate.

The front or rear exhaust manifold may crack causing an exhaust leak. Our technicians tell us the manifold should be replaced to correct this condition.

The anti-lock brake (ABS) pressure modulator valve assembly may fail internally causing the ABS light to illuminate.

The Engine Control Module (ECM) can fail causing stalling, and engine and transmission drivability concerns.

The ABS accumulator may fail causing loss of power brake assist. (The brake pedal will become very hard).
Air flow from the dash vents may be incorrect due to a damaged engine vacuum hose near the battery tray.

Fuel injectors can short-circuit electrically causing a rougher than normal idle and reduced performance.

One or more of the rear suspension links may become bent causing a severe rubbing noise.

The anti-lock brake (ABS) accumulator may fail causing loss of power brake assist. (The brake pedal will become very hard.)

The anti-lock brake (ABS) accumulator may fail causing loss of power brake assist. (The brake pedal will become very hard.)

The ABS master cylinder assembly may fail internally causing the ABS light to illuminate.
The ABS master cylinder assembly may fail internally causing the ABS light to illuminate.

If the ABS light on the instrument panel illuminates, our technicians recommend checking the brake lamps first. It could indicate that a brake light is not working or has burned out.

If the ABS light on the instrument panel illuminates, our technicians recommend checking the brake lamps first. It could indicate that a brake light is not working or has burned out.

If the ABS light on the instrument panel illuminates, our technicians recommend checking the brake lamps first. It could indicate that a brake light is not working or has burned out.