BMW 530i Problems

RepairPal has identified the most common problems with the BMW 530i as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.

Refine by vehicle
×
Choose your vehicle
19
Known Problems

Valve cover gasket leaks are common after 60,000 miles. Symptoms will include oil drips under the vehicle and burning oil smell from the engine compartment.

The front thrust rod bushingsalso referred to as tension strut bushingsare known to fail occasionally. The oil-filled rubber mounts weaken and crack over time, causing a mushy road feel and shuddering in the steering wheel when going over bumps. These worn bushings should be replaced.

The thermostat may fail resulting in engine overheating and/or illumination of the Check Engine Light. Replacement of the thermostat along with a complete inspection of the cooling system will be necessary to correct this concern.

Overheating can cause severe engine damage. If the engine begins to overheat it is recommended to stop at the first available location and have your vehicle towed to a repair shop.

It is not uncommon for the radiator to develop a coolant leak. A leaking radiator will require replacement. When a leaking radiator is replaced the entire cooling system should be inspected and if any additional leaks are found they should be repaired also.

Overheating can cause severe engine damage. If the engine begins to overheat it is recommended to stop at the first available location and have your vehicle towed to a repair shop.

The low coolant light may illuminate and/or the engine may overheat as a result of a coolant leak from the water pump. The leaking pump will require replacement and the entire cooling system should be inspected for leaks as it is not uncommon to find multiple leaks on higher mileage vehicles.

Overheating can cause severe engine damage. If the engine begins to overheat it is recommended to stop at the first available location and have your vehicle towed to a repair shop.

An engine coolant leak may develop from the expansion tank resulting in engine overheating. When a cooling system component fails the entire cooling system should be inspected. It is not uncommon to find additional component have failed or are leaking.

Overheating can cause severe engine damage. If the engine begins to overheat it is recommended to stop at the first available location and have your vehicle towed to a repair shop.

The blower final stage fan resistor is known to fail. Symptoms are the heater fan speed varies regardless of the setting, the fan will not turn off when the car is switched off, or the fan will not switch on at all.

Leaks are known to develop in the cooling system. It is common to see more than one part recommended for repair/replacement due to overlapping labor and the use of many plastic parts in the system.

Engine oil leaks commonly develop from both valve cover gaskets, intake manifold, and PCV plate after about 60,000 miles.