power windows on 1994 Oldsmobile Cutlass Ciera

Every one of the power windows do not work all stopped at 1 time. The fuse is ok in fuse panel. What should I check

by in Belcourt, ND on April 11, 2011
2 answers
ANSWER by on April 11, 2011
If you open your driver's door and look to where the hinge(s) area is you will notice a loom of wiring that goes from your front bulkhead area into the door....it is usually protected by a layer of material called conduit...the main power feed to your power window master control switch goes through this conduit....years of opening and closing the door cause the wires inthe conduit to break....to diagnose the problem do "wiggle testing" ...grabbing the conduit/loom of wires and moving them around while at the same time trying your window switches....if the windows start moving you know your on the right path....the repair procedure is to cut open the conduit and physically inspect all the wires for breaks and then repairing and re-taping them..good luck...
ANSWER by on May 09, 2011
Swap relays with another of the same ...got relays with the fuses and some in the engine swap same with same....easy
Related Items:
A door window may move slowly or stop in mid travel due to a failing power window motor. The affected window may start working again after the motor cools off. Replacing the faulty window motor...
My power window is stuck in the down position.Is there a way that I can get it up manually.
My power windows aren't working at all. I checked the circuit breakers: OK. Replaced master power window swit...
I have an idea as to how to get the panel off. I have no clue how, if it is even possible to manually put a power window up without replacing the motor. All other windows are working, so I doubt it...

Related Content