The power door lock button on the driver side door does not work like it should. i check the fuses and everything looks good,i replaced the whole assembly and still the problem is not solved. the funny thing is that all the other power buttons work,power mirrors,power windows work and the window lock is all working fine.the only way i can open the door is through the key or the key fob.could it be the wireing or some other electrical issue
Power door lock on 1997 GMC Yukon
by JoeeD in Dunellen, NJ on July 30, 2009
ANSWER by Russ on July 31, 2009
I would suspect you have a problem with power supply to the door lock switch or the output wiring to the door lock control module. If power to the door lock switch on the orange wire is ok then you will need to check the light blue and white output wires to the door lock module for an open circuit.
ANSWER by sandmannc40 on January 18, 2010
Drivers side lock does not work with wireless entry or with the key. It is now locked closed. Cannot get it unlocked. Passenger side works fine. The Drives side will lock when the keyless entry is pressed or with the inside lock button is pressed but will not unlock. Can you help with some idea of what's wrong?
ANSWER by rjsnewmexico on May 26, 2012
check fuse panel on diver side first. any lock/unlock problems on any door. 3 relays. one is for driver door only. $10.00 dollar relay #8867 gm#15328867. fix my 2003 yukon, not locking rear door. i switched relays and found problem switched from not locking to not unlocking. i replaced 1 relay. might help owners with recent lock/unlock problems. hope it helps. rjs
The power door lock actuators may become slow to operate or stop working completely and require replacement.
But when i use the remote keyless entry it works to open all the doors, what gives? Truck has 169000 miles. Also my outside mirrors are power, but they arent working, help!!