Google+
Facebook
Twitter
Email

Porsche » 968 » 1995 Porsche 968 » Car Problems

Problem Reports

Report A Problem

Problem with your car? See what our experts say or submit your own.

1995 Porsche 968 Problems

Engine Oil Leaks May Cause the Flesible Hub at the Engine Flywheel to Fail

for the Porsche 968

In automatic transmissions, the flexible hub at the engine flywheel may deteriorate and fail, causing a large amount of play in the driveline. This failure may be caused by prolonged engine oil leaks.

5 Reports

Me Too

Failed Hood and Deck Lid Supports

for the Porsche 968

The front hood and rear deck lid support struts may fail; replacement is required.

3 Reports

Me Too

Inspect CV Boots and Joints at Each Service

for the Porsche 968

The constant velocity (CV) boots and CV joints should be inspected at each service. Servicing the torn CV boots early can prevent the need to replace the CV half shaft or CV joint.

4 Reports

Me Too

Engine misfire or excess fuel consumption can damage catalytic converter

for the Porsche 968

If engine misfiring, rough running, or fuel consumption issues are not resolved quickly, the catalytic converter can overheat and fail.

4 Reports

Me Too

Monitor warning lights and inspect brakes

for the Porsche 968

Pay close attention to warning lights and have the brakes inspected regularly—immediately address any brake problems. Hard driving habits will cause excessive brake pad and rotor wear.

4 Reports

Me Too

Timing belt inspection and adjustment

for the Porsche 968

life cannot be ascertained by inspection only. The and must be maintained using the correct belt-adjustment tool.

4 Reports

Me Too

Suspension components require regular inspection

for the Porsche 968

Suspension components (including control arms, boots, and ball joints) are critical and require regular inspection.

4 Reports

Me Too

Aged brake fluid causing problems

for the Porsche 968

Aged brake fluid can cause numerous problems and should be replaced regularly.

4 Reports

Me Too

Noise in manual transmission due to pinion bearing failure

for the Porsche 968

Pinion bearing failure can cause noise in the manual transmission. A revised assembly procedure and components are required for repair.

8 Reports

Me Too

Regularly check camshaft chain tensioner

for the Porsche 968

The tensioner for the camshaft chain must be inspected regularly because the non-metallic pad for the timing chain variocam adjuster can crack/break apart unexpectedly. The inspection/repair will require valve cover removal and reinstallation.

4 Reports

Me Too

Inspect cooling system frequently to prevent small leaks at reservoir

for the Porsche 968

The cooling system must be inspected regularly, as small leaks can develop at the reservoir. The heater valve and fan operation should also be inspected.

4 Reports

Me Too