Pontiac Recalls

Summary:
THE DRIVER AND PASSENGER FRONT SEAT MANUAL RECLINING MECHANISMS DO NOT COMPLY WITH THE REQUIREMENTS OF FMVSS 207, "SEATING SYSTEMS." THE SEAT BACK MECHANISMS WILL NOT LATCH UNDER CERTAIN CONDITIONS.
Summary:
THE FOG LAMPS, LOW BEAM HEADLAMPS, AND HIGH BEAM HEADLAMPS CAN BE OPERATED SIMULTANEOUSLY. THIS CAN CAUSE THE HEADLAMP CIRCUIT BREAKER TO OVERLOAD AND TRIP, RESULTING IN LOSS OF HEADLAMPS (LOW AND HIGH BEAM) AND FOG LIGHTS.
Summary:
THE AUTOMATIC TRANSMISSION SHIFT CONTROL CABLE CAN SEPARATE.
Summary:
THE VEHICLES WERE ASSEMBLED WITH AN INCORRECT SUSPENSION UPPER SPRING SEAT AT THE RIGHT-REAR POSITION. IF THE VEHICLE IS INVOLVED IN A REAR IMPACT ACCIDENT, THE RIGHT-HAND REAR WHEEL HOUSE FLANGE COULD SEVER THE FUEL TANK FILLER PIPE AND SPILL FUEL.
Summary:
THE GLOVE COMPARTMENT DOOR WILL NOT REMAIN CLOSED DURING CERTAIN LOAD FORCES ASSOCIATED WITH A VEHICLE CRASH. THIS DOES NOT COMPLY WITH THE REQUIREMENTS OF FMVSS 201.
Summary:
THE PASSENGER'S SIDE EASY-ENTRY SEAT ADJUSTER MAY FAIL FULLY LOCK INTO POSITION AFTER THE SEAT BACK HAS BEEN TILTED FORWARD AND THE SEAT SLID FORWARD, THEN RETURNED TO ITS ORIGINAL POSTITION.
Summary:
MOISTURE CAN ENTER THE EXPRESS-DOWN ELECTRONIC CONTROL MODULE AND CAUSE A SHORT CIRCUIT THAT CAUSES WINDOW OPERATION WITHOUT OPERATOR CONTROL, AND LEAVES THE WINDOW IN THE DOWN POSITION.
Summary:
THE ACCELERATOR CABLE MAY HAVE BEEN KINKED DURING VEHICLE ASSEMBLY. THE KINK IN THE CABLE CAN CAUSE EITHER A HIGH EFFORT ACCELERATOR CABLE, STICKING ACCELERATOR CABLE, OR A BROKEN ACCELERATOR CABLE.
Summary:
THE FRONT DOOR SHOULDER BELT GUIDE LOOPS MAY BE CRACKED AND ARE NOT IN COMPLIANCE WITH FMVSS 208.
Summary:
A RIGHT HAND SEAT/SHOULDER BELT RETRACTOR MAY HAVE BEEN INSTALLED IN THE SECOND ROW LEFT HAND SEAT POSITION (DIRECTLY BEHIND DRIVER).

Related Content