2004 Pontiac Grand Prix Problems

RepairPal has identified the most common problems with the 2004 Pontiac Grand Prix as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.

Refine by vehicle
×
Choose your vehicle
21
Known Problems

The transmission pressure control solenoid may fail causing erratic shifting. Our technicians tell us that partial dis-assembly of the transmission is necessary to replace a failed pressure control solenoid.

The catalytic converter may become plugged resulting in loss of engine power. General Motors has extended the catalytic convertor warranty on some models to 10 years or 120,000 miles. Please contact your local GM dealer to see if your vehicle is included.

The intake manifold gasket may develop and external engine oil or coolant leak. In some cases, an internal coolant leak may occur causing coolant to mix with the engine oil. Our technicians tell us that operating the engine  with a coolant/oil mix can result in internal engine damage. Replacing the intake manifold gasket should correct these leaks.

The anti-lock brake (ABS) accumulator may fail causing loss of power brake assist. (The brake pedal will become very hard.)

One or more power windows may stop working due to a failed window motor or switch. Proper diagnoses will be necessary to determine the exact cause.

The 2004-2007 Pontiac Grand Prix is known to have issues with the EVAP system, a part of your emission control system.

The EVAP canister vent valve or valve solenoid wiring may fail causing illumination of the check engine light, setting code P0446, and problems filling the tank with fuel.

To correct the issue, the EVAP canister vent valve, solenoid, and wiring must be inspected. The most common fix is replacement of the wiring connector or replacement of the vent valve assembly.

The fuel pump may fail causing engine to stall and not restart.

The steering may develop a clunk type noise from the upper intermediate steering shaft.  Our technicians tell us that you should check with your local GM dealer to find out what the latest repair is for this condition.

The oxygen sensor can fail causing Check Engine Light illumination and the engine to run rich (burn more fuel than normal).

One or more of the power windows may stop working due to a failed window switch. Failed switches will require replacement.

The high pressure power steering hose will commonly leak fluid; it should be replaced.

Illumination of the Check Engine Light can be caused by a loose or worn gas cap.

The water pump may develop a coolant leak resulting in an engine overheating condition.

 

The serpentine belt tensioner pulley may wear out. Our technicians tell us that in order to get a new pulley from General Motors you must purchase a complete belt tensioner assembly.