2002 Oldsmobile Intrigue Problem Reports

RepairPal Verified 2002 Oldsmobile Intrigue Problem Reports

Report A Problem
View:Most ReportedNewestRepairPal Verified

The crankshaft position sensor may fail causing the engine to stall intermittently, the Check Engine Light may or may not illuminate.

Illumination of the Check Engine Light can be caused by a loose or worn gas cap.

Illumination of the Check Engine Light can be caused by a loose or worn gas cap.

Acid may leak from the battery at the cable connections, resulting in corrosion on the battery cable ends and in the battery tray. A Leaking battery should be replaced and the cables thoroughly cleaned or replaced if necessary.

The automatic transmission shifter may fail, or a wire may break near the shifter causing the ignition key to become stuck in the ignition lock cylinder.

Overheating of the engine may cause the cylinder head to expand, severely straining the head bolts and damaging the threads in the engine block. This commonly results in a blown head gasket. Our technicians tell us the engine block threads must be repaired before the cylinder head is reinstalled.

The transmission pressure control solenoid may fail causing erratic shifting. Our technicians tell us that partial dis-assembly of the transmission is necessary to replace a failed pressure control solenoid.

The fuel pump may fail causing engine to stall and not restart.

The steering may develop a clunk type noise from the upper intermediate steering shaft.  Our technicians tell us that you should check with your local GM dealer to find out what the latest repair is for this condition.

The high pressure power steering hose will commonly leak fluid; it should be replaced.

The engine may start and stall with the security light flashing. This is commonly caused by a failed passlock sensor which is part of the ignition lock cylinder. A secondary cause could be the ignition switch itself. Worn contacts inside the ignition switch can cause voltage drop issues which can affect the passlock system. Proper diagnoses should be performed before replacing any parts.