OIL in a 2005 crossfire on 2005 Chrysler Crossfire


by in Baton Rouge, LA on July 04, 2010
2 answers
ANSWER by on July 05, 2010
The owners manual says 8.5 quarts. If you are changing the oil and filter, after adding the oil start the car for a minute of 2 to make sure you have oil pressure, make sure nothing is leaking. Shut off engine, check oil while car is level top off or drain as necessary. If you need an owners manual you can download one here FREE: http://www.autousermanual.com/view/chrysler/crossfire/2005/
ANSWER by on September 12, 2010
usually 7-8. The manual tells you. Synthetic Mobil One
Related Items:
Recently when I start my Crossfire, a wrench pic with '25' appears initially in the odometer LED. After approximately 15 seconds it disappears and the usual odometer numbers appear. It has 29,780...
I've just noticed that after fueling my gas tank and starting the engine, I have to wait for the odometer to either reset or finishing displaying a (lighting bolt symbol) followed by a set of desce...
Often misdiagnosed as a transmission oil pan gasket leak, the electrical connector on the automatic transmission may leak.
I have a SRT and on the inst cluster there is a warning on the trip odometer that look like a fluid can with the word HI next to it. It stays on for about 5 seconds then goes out. The chime also ...

Related Content