Not starting on 2002 Suzuki Aerio

The car cranks but doesn't start. Read error codes came up with p0113 IAT sensor high input.

by in Metairie, LA on May 30, 2010
1 answer
ANSWER by on May 30, 2010
The Intake Air Temperature Sensor can cause a Crank/No Start condition, as it helps control the Fuel Mixture. If the wiring to the Sensor looks ok, then I would replace the Sensor and go from there. Disconnect the Battery Negative cable for 1 minute to clear out the code and re-set the Computer memory. The factory sensor costs $97.00, it is easy to replace, it is on the air filter box.
1 person likes thisFlag inappropiateReply
Related Items:
When on the way there is a need to stop and start car 4 ~ 5 times it starts MISSING (Current or Fuel Supply interrupts. Have Changed: Distributor Cap, Rotor Arm, Spark Plugs, Spark Plug Wires, Poi...
Car had no spark, replace the crank angle sensor also known as the camshaft synchronizer. Replace the sensor the car started right up also replaced the battery. Car was finish in the morning and th...
The Suzuki shop had stood with my car numbers of times, they have change and replace three new starters and after two months the promblem has return now they put a relay on the starter. I have ask ...
The Suzuki shop had stood with my car numbers of times, they have change and replace three new starters and after two months the promblem has return now they put a relay on the starter. I have ask ...
my 2004 started right up but on way to work about 1 1/2 miles the radio started to turn off after the 3rd time i noticed the red battery light was on i parked at work when i tried to start car afte...