no start on 1996 Pontiac Grand Am

my friend's car won't start. they have replaced the fuel pump. I noticed the anti-theft light is on constant. I checked codes with a mac pro reader. it came up with cam and crank sensor codes. Is this due to the pass-lock system. I can't hear the pump running when the key is on.

by in Billings, MT on April 13, 2010
2 answers
ANSWER by on April 15, 2010
I would suggest to diagnose and repair the ant-theft system in your 1996 Pontiac Grand Am. Please use the following link for more information on GM anti-theft systems - Often times the ignition lock cylinder is at fault but assuming that may get you in more trouble. Electronic service information is available from Mitchell, please use the following link for more information -
ANSWER by on March 15, 2011
turn egnition switch to the on position, don't crank it, and wait ten minuets. If no go check dash cluster if not working replace and repeat 10 min deal. Good luck
Related Items:
...asslock sensor in the ignition lock cylinder may fail causing an anti-theft system fault and a no start condition. Our technicians tell us that the ignition lock cylinder should be replace to correc...
The ignition switch may fail causing a no start condition. This is not generally a theft system (passlock) issue because the security light does not illuminate or flash.
multiple times this past 18mo the car has had a no start problem--mechanic has replaced the control modudule for coil and been able to get it running b...
Service engine light, ABS light, wipers don't work when ignition key is turned to run/on. Motor cranks and turns over fine. Was running great then when turned off it will not start again. unable to...
Car runs like a gem all year except for 2 months in winter. Will start right back up in the spr...

Related Content