I do have a Mazda MX6 2.5 V6 1997 MODEL. I had to replace my old motor with a import motor exact same as my old one. Ever sinse no results no spark on plugs. I did replace the distrubiter and cranckshaft sensor replaced Icnition rest ECU - stil no results. please help my car is standing now for 8 months
No spark on 1997 Mazda MX-6
by Pieter in Spring Mount, PA on April 11, 2011
ANSWER by Superbob on April 13, 2011
You could check to see that you have power and ground at the distributor, for starters, but I think you need an expert diagnosis at this point. I'd recommend you get the car checked by a Mazda expert. There are too many things that could go wrong during an engine swap for me to be able to help you very much. If you want to find a specialist, here's a directory link for you: https://repairpal.com/directory?address=19478&car_brand_names=Mazda
If the engine cranks but will not start, it may be due a failed distributor. In the diagnosis, it may be discovered that the Electronic Engine Control (EEC) Unit is the cause if ignition spark is r...
The car died with fuel Pressure but no spark. I replaced distributor, cap, plugs, rotor, wires and plugs. Started right up. Timing was off and failed smog. I went to adjust the timing and car died ...
i dont have spark i dont know waht i can do
There is gas, I also change the fuel pump.
I've just had my water pump replaced and now the car is having an trouble picking up speed and engine shuts off. The mechanic who put the water pump said I needed to get a tune up and that the rpms...