No battery voltage to distributer, no voltage on the BLK/YEL wire coming to the dist. Where does this wire get the voltage? In the recent past I have replaced the coil TWICE, the hi-tension out put conection was cracked and burned, mabe moisture getting into the cap? Need you expertise. Thanks, Jim
no spark on 1991 Acura Integra
by 91acura-jim in Anchorage, AK on April 19, 2009
ANSWER by patrick mannion on April 19, 2009
The black yellow wire gets power directly from the ignition switch. The electrical portion of the ignition switch is a relatively high failure item. The White/Black wire at the ignition switch is battery live if it has no power the 50 or 70 amp main fuse has blown.
...quit and hasnt ran since i put a brand new distributor on it and ecu and main relay and still no spark to my plug wires and my ecu isnt even coming on can anyone help me?
i'm not gettin any power to the coil.....i checked for voltage on the blk and yellow wire coming from the car and i got nothing... any ideas of what can be the problem
...tried 2 start my car not knowing I had pulled the wires. Now my car wont turn over & there is no spark at all. Please some1 tell me what is wrong w/ my car?
Here's the skinny: I was driving my car on the way home this past Thursday (5/3) when my car was having issues maintaining speed on 5th gear (5-speed manual) on the freeway. I would shift to 4th to...
I have a 91 integra that just dies while driving. I check for spark and sometimes I have it, sometimes not. I've replaced the cap, rotor, coil (twice), and fuel filter. It seems to be worse when ho...