1999 Cadillac Escalade Q&A

1999 Cadillac Escalade Question: no fuel pressure pump pressure

i do not have any voltage at fuel pump connection -
Answer 1
Suspect fuel pump relay. Found online: Initially, the vehicle’s battery should be disconnected and once you get rid of the battery, you should be able to find the Fuel Pump Relay positioned in the forward compartment, beside the drivers junction block. The sub-terminal block should be unlocked to locate the fuel pump relay. You need to take away the FP relay from its position. You can find the locking clip for blue terminal in the junction block and remove that. The female FP relay should be removed using a tool to remove the terminals. Now, you may insert the new replacement part in the position of the older one. The terminal pins should be re-inserted too. The blue locking clip should be re-installed, and the male pins associated with the FP relay should be twisted to some extent. -
Related Items:
will start but only for a half second if i use started fluid i have put in new fuel pump, fuel injector, all fuel line cleaned also all fuses are good in the wires in spark plugs are new, new batt...
It stalls like it ran out of gas, has more than half a tank. CHECK GAGES light doesnt come on a...
Is the fuel pump randomly bad then good? Cause if I wait awhile, could be 1hr or 3hrs.. It starts! Is the emission sensor a culprit To this problem?
I have replaced the ignition coil, spark plug wires and it still does not start. I also tried my other set of keys but no luck. What can I do?