no brake lights, fuse good, bulbs good. on 2002 Chevrolet Trailblazer

is there a sensor or a relay for the rear break lights. they are not working, bulbs are good, fuse is good.

by in Kenosha, WI on November 12, 2010
2 answers 6 comments
ANSWER by on November 12, 2010
Try checking the brake light switch on the brake pedal of your 2002 Chevrolet Trailblazer.
COMMENT by on November 12, 2010
I changed it and still have no brake lights. Everything else works.
COMMENT by on November 15, 2010
Is the high mounted brake light out also?
COMMENT by on November 15, 2010
No
COMMENT by on November 16, 2010
If the high mounted brake light is working then you know the brake light switch is good. There is a fuse for the lower brake lights in the rear fuse box (under the 2nd row seat, drivers side). Check the VEH STOP fuse. If the fuse is good and there is power to the fuse the chances are you have a wiring problem between the fuse and the rear lights.
COMMENT by on November 16, 2010
Problem is solved, thank you very much
COMMENT by on November 16, 2010
If the fuse blows again be sure to check the brake light bulbs as socket plates for problems.
ANSWER by on November 12, 2010
brake light switch brobly
Related Items:
Center high mounted light works, turn signal & hazards work. All fuses good, brake switch good. Could the problem be in the multifunction switch? Any assistance appreciated...
My tail light does not work. I replaced bulb already. The previous owner has already had the recalled brake light fixed. the brake and turn signal lights still work. Any ideas?