Nissan Recalls

RepairPal Expert Overview on March 31, 2016

The wiring harness to the starter motor may have been improperly installed, resulting in the starter harness terminal to contact a heat shield. This could cause an electrical short and a risk of fire.

RepairPal Expert Overview on March 11, 2016

The engine may stall without warning due to failure of the fuel pump. This would result in the increased risk of a crash.

RepairPal Expert Overview on February 29, 2016

The brakes may require extra effort to slow down and stop the vehicle due to a failure of a brake relay. This can cause longer stopping distance and risk an accident.

RepairPal Expert Overview on January 22, 2016

The hood may open while driving the vehicle, resulting in the loss of visibility and increasing risk of a crash. 

RepairPal Expert Overview on November 20, 2015

The shift lever may be moved from park without depressing the brake pedal. This can cause a safety concern, as the vehicle could unexpectedly be out of the park gear and begin rolling.

RepairPal Expert Overview on November 5, 2015

The bolts that secure the front brake calipers may not be tightened properly. This may result in loss of braking ability.

RepairPal Expert Overview on October 20, 2015

A malfunction may occur in the occupant classification system, which determines if an adult is seated in the passenger front seat. If this occurs, the passenger front air bag may not deploy as needed in a crash, resulting in occupant injury.

RepairPal Expert Overview on September 14, 2015

The front coil springs may corrode and fracture when exposed to road salt in cold weather states that use it. If a spring breaks, it may contact the tire and cause tire failure resulting in loss of vehicle control. 

RepairPal Expert Overview on August 12, 2015

The center console has a trim piece that the driver's shoe and foot can get caught on, causing a possible delay in controlling the vehicle's acceleration or braking.

RepairPal Expert Overview on August 10, 2015

The front seat belt buckles may not latch or unlatch properly, resulting in leaving an occupant not properly secured, or not able to exit when needed.