2005 Nissan Frontier Problem Reports

Most Reported 2005 Nissan Frontier Problem Reports

Report A Problem
View:Most ReportedNewestRepairPal Verified

The fuel level sensor can fail causing erratic or inaccurate fuel gauge readings. The Check Engine Light may also illuminate. Nissan has recalled 2006 - 2008 vehicles only for this fuel gauge issue. For more information on the recall, please click here»

A whining or buzzing type noise may develop from the timing chain area caused by excess slack in the secondary timing chains. Nissan has issued a service bulletin (NTB09-128) regarding this issue. Replacement of both secondary timing chains and their tensioner shoes will be necessary to repair this concern. As part of this repair, the engine oil and filter should also be replaced.

The distributor shaft bearing can become rusty, and seize causing the engine to stall or not start. The failed distributor will commonly require replacement.

The fuel injectors can fail and cause drivability problems. Often there is no Check Engine light and the failures can be caused by corrosion of the connector, clogging beyond the point of cleaning, and/or internal failures.

Truck was in for routine service and service told me I had coolant leaking into transmission. Over $1.000 to repair!

The vehicle accelerates real slow and has vibration in the engine. Ran a OBD2 scanner and got the scan trouble codes. There were two codes detected, a P0300 and a P0328. The P0300 was a multiple misfire problem and the other was the knock sensor code. These parts are both killers on a person's wallet. Now I see why the dealer repairs are so expensive. To replace the knock sensor on a V6 VG33 engine you gotta move the whole intake to include th...

The rear universal joint failed when I was driving.

Screws inside the intake manifold can become loose causing internal engine damage if they fall out completely. Our technicians report that using a strong thread locker on the power valve butterfly screws can help prevent them from becoming loose.