The engine may stall at times due to a failed crankshaft position sensor and/or camshaft position sensor, These sensors can fail intermittently as they warm with the engine. Sensors on certain models have been recalled by Nissan and will be replaced as necessary. Please visit our recall section for this model to see if your vehicle is covered by this recall.
Problems for specific Nissan Altima years:
Car problem reports
Problem with your car? See what our experts say or submit your own.
Newest reported 2004 Nissan Altima problems
small leaking of transmission fluid at case seal
Crankshaft and camshaft position sensors can leak oil into the connector causing Check Engine Light illumination. The engine may also stall as a result. Leaking sensors should be replaced. Certain 2002 models were recalled for a separate camshaft and crankshaft sensor issue. For more information on the recall please click here»
The thermostat may become stuck closed, causing an overheating condition. Replacement of the thermostat will be required to correct this concern.
The AC system may blow warm air due to refrigerant loss caused by a leaking low pressure AC hose. These hoses commonly develop a leak at the hose crimp connection.
The front struts can wear prematurely and create a knocking noise when driving over bumps.
The engine mount on the right side can wear prematurely and cause excessive engine movement.
Screws inside the intake manifold can become loose causing internal engine damage if they fall out completely. Our technicians report that using a strong thread locker on the power valve butterfly screws can help prevent them from becoming loose.
The catalytic converter closest to the cylinder head can fail causing illumination of the Check Engine Light. Prompt repair of this problem is recommended because the catalyst material can be sucked into the engine and cause internal damage.
The external seal on the engine oil cooler can fail and create an oil leak.