The engine may stall at times due to a failed crankshaft position sensor and/or camshaft position sensor, These sensors can fail intermittently as they warm with the engine. Sensors on certain models have been recalled by Nissan and will be replaced as necessary. Please visit our recall section for this model to see if your vehicle is covered by this recall.
Problems for specific Nissan Altima years:
Car problem reports
Problem with your car? See what our experts say or submit your own.
Newest reported 2000 Nissan Altima problems
Crankshaft and camshaft position sensors can leak oil into the connector causing Check Engine Light illumination. The engine may also stall as a result. Leaking sensors should be replaced. Certain 2002 models were recalled for a separate camshaft and crankshaft sensor issue. For more information on the recall please click here»
The Check Engine Light may illuminate due to a defective canister vent control valve in the emissions control system.
The AC system may blow warm air due to refrigerant loss caused by a leaking low pressure AC hose. These hoses commonly develop a leak at the hose crimp connection.
The engine mount on the right side can wear prematurely and cause excessive engine movement.
from a cold start air conditioning works fine and will continue to work fine as long as engine is running and air conditioning stays on, drove 200 miles and air blew cold entire time. Stopped to get a drink turning off car. Engine restarted but Air conditioning compressor would not come back on. When engine completely cooled and air system stabilized air compressor came back on and air was cold again. This situation was repeated dozens of ti...