2000 Nissan Altima Problem Reports

RepairPal Verified 2000 Nissan Altima Problem Reports

Report A Problem
View:Most ReportedNewestRepairPal Verified

The engine may stall at times due to a failed crankshaft position sensor and/or camshaft position sensor, These sensors can fail intermittently as they warm with the engine. Sensors on certain models have been recalled by Nissan and will be replaced as necessary. Please visit our recall section for this model to see if your vehicle is covered by this recall.

An engine vacuum leak from the  intake manifold gasket may cause the engine to misfire or have a rough idle which may also illuminating the Check Engine Light.

Crankshaft and camshaft position sensors can leak oil into the connector causing Check Engine Light illumination. The engine may also stall as a result. Leaking sensors should be replaced. Certain 2002 models were recalled for a separate camshaft and crankshaft sensor issue. For more information on the recall please click here»

The Check Engine Light may illuminate due to a defective canister vent control valve in the emissions control system.

The camshaft driven distributor can leak oil and cause a malfunction of the crankshaft position sensor. The engine may crank but not start or run very poorly.

The AC system may blow warm air due to refrigerant loss caused by a leaking low pressure AC hose. These hoses commonly develop a leak at the hose crimp connection.

The engine mount on the right side can wear prematurely and cause excessive engine movement.

A problem in the vehicle speed sensor circuit may cause the Check Engine Light to illuminate.